About Austin Industrial

Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries.

To learn more about us, visit .

Insulator/Metal-man

Must be able to apply, remove, and repair insulating material to exposed surfaces or structures, such as air ducts, hot or cold pipes, storage tanks, boilers and buildings to help control noise and maintain temperatures. Other duties may be assigned.

Insulator/Metal-man

Specific Duties and Responsibilities:

• Reads blueprints and selects required insulation material.
• Work at heights with no fear.
• Brush adhesives on or attach metal adhesive applicationto insulation material.
• Determine the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, and urethane based on material's ability to retain heat, location, surface, shape, and equipment use.
• Using tape measure or other measuring device, measure and cut insulation material to specified size and shape for covering flat or round surfaces, using handsaw, knife, or scissors.
• Fit, wrap or attach required insulation material around or to structure, following blueprint specifications.
• Cover or seal insulation with preformed plastic covers, canvas strips, sealant or tape to secure insulation to the structure - according to the type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position.

Insulator/Metal-man

Qualifications Required for this Position:

Education – no minimum education requirements.

Experience – 3-5 years of Journeyman level experience.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Insulator/Metal-man

Austin Industrial is an Equal Opportunity Employer.

• See the “Know Your Rights” poster available in and .

No Third-Party Inquiries Please

• This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy.The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).

Accessibility Note

• If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact thePeople Services Teamat(877) 831-1217.

About Austin Industrial

Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries.

To learn more about us, visit .

Insulator/Metal-man

Must be able to apply, remove, and repair insulating material to exposed surfaces or structures, such as air ducts, hot or cold pipes, storage tanks, boilers and buildings to help control noise and maintain temperatures. Other duties may be assigned.

Insulator/Metal-man

Specific Duties and Responsibilities:

• Reads blueprints and selects required insulation material.
• Work at heights with no fear.
• Brush adhesives on or attach metal adhesive applicationto insulation material.
• Determine the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, and urethane based on material's ability to retain heat, location, surface, shape, and equipment use.
• Using tape measure or other measuring device, measure and cut insulation material to specified size and shape for covering flat or round surfaces, using handsaw, knife, or scissors.
• Fit, wrap or attach required insulation material around or to structure, following blueprint specifications.
• Cover or seal insulation with preformed plastic covers, canvas strips, sealant or tape to secure insulation to the structure - according to the type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position.

Insulator/Metal-man

Qualifications Required for this Position:

Education – no minimum education requirements.

Experience – 3-5 years of Journeyman level experience.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Insulator/Metal-man

Austin Industrial is an Equal Opportunity Employer.

• See the “Know Your Rights” poster available in and .

No Third-Party Inquiries Please

• This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy.The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).

Accessibility Note

• If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact thePeople Services Teamat(877) 831-1217.

About Austin Industrial

Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency.

Insulator Metal-man

Must be able to apply, remove, and repair insulating material to exposed surfaces or structures, such as air ducts, hot or cold pipes, storage tanks, boilers and buildings to help control noise and maintain temperatures. Other duties may be assigned.

Insulator/Metal-man

Specific Duties and Responsibilities:

• Reads blueprints and selects required insulation material.
• Work at heights with no fear.
• Brush adhesives on or attach metal adhesive applicationto insulation material.
• Determine the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, and urethane based on material's ability to retain heat, location, surface, shape, and equipment use.
• Using tape measure or other measuring device, measure and cut insulation material to specified size and shape for covering flat or round surfaces, using handsaw, knife, or scissors.
• Fit, wrap or attach required insulation material around or to structure, following blueprint specifications.
• Cover or seal insulation with preformed plastic covers, canvas strips, sealant or tape to secure insulation to the structure - according to the type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position.

Insulator/Metal-man

Qualifications Required for this Position:

Education – no minimum education requirements.

Experience – 3-5 years of Journeyman level experience.

Insulator/Metal-man

Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Austin Industrial is an Equal Opportunity Employer.

• See the “Know Your Rights” poster available in and .

No Third-Party Inquiries Please

• This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy.The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).

Accessibility Note

• If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact thePeople Services Teamat(877) 831-1217.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce.

Turner Industries Group is seeking an experienced Ironworkerfor a turnaround position in Kingsport, TN.The Ironworker position works as a member of a crew to raise, place and unite girders, columns and other structural-steel members to form completed structures and frameworks. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently.

• Turnaround work
• Per diem available for those who qualify

Essential Qualifications:

• High school or equivalent
• One (1) to four (4) years of experience in specified skill (depending on mechanic level)
• Knowledge of ironworker tools and how to use them
• Rigging skills including wire rope slings
• Some job sites may require NCCER certification
• Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the company Drug, Alcohol and Contraband Policy
• Comply with company and client job site safety requirements
• Must not pose a direct threat to the health or safety of others in the workplace

Functional Requirements:

Off loads deliveries of structural material from the fabricator; sets up and breaks down hoisting equipment for raising and placing structural-steel members; fastens steel members to cable of hoist; signals worker operating hoisting equipment to lift and place steel member; guides member or rides on member in order to guide it into position; pulls or pries steel members into approximate position while member is supported by hoisting device; forces members into final position; aligns holes in member with corresponding holes in previously placed member; verifies vertical and horizontal alignment of members; bolts aligned members to keep them in position until they can be permanently bolted; cuts steel members to make alterations; perform additional assignments per supervisor's direction

Compensation

Final agreed upon compensation is based upon individual qualifications and experience.

Benefits

Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program.

Physical Involvement:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

Keywords: ironworker, rigging, welding, structural ironworker

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce.

We are seeking an Ironworker Foreman for a turnaround position in Kingsport, TN. The Foreman position exercises independent judgment and supervises and directs a group of workers engaged chiefly in one occupation. Non-exempt role; Reports to the General Foreman or Supervisor; Performs a variety of routine duties within established policies.

• Turnaround work
• Per diem available for those who qualify

Essential Qualifications:

• High school or equivalent
• Minimum two (2) years of experience as a Mechanic A/Journeyman
• Knowledgeable in his/her craft, in order to lead others in the same craft
• Possesses basic leadership/mentor skills
• Able to plan/coordinate multiple job tasks at the same time
• NCCER Crew Leader Certification preferred
• Written pre-employment qualification test
• Post-offer drug/alcohol screen and physical evaluation
• Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)
• Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.)
• Applicant/employee must not pose a direct threat to the health or safety of others in the workplace

Functional Requirements:

Upholds company safety guidelines to all employees under his/her direction, Interprets blueprints, sketches, written and/or verbal orders, Assigns duties, lines up and follows up all work and is responsible for production of the unit, Inspects work to ensure adherence to company standards, Trains and assists workers in the performance of their duties, Supervises and coordinates activities of assigned construction workers, Interprets company policies to workers and enforces safety, Regulations, analyzes and resolves work related problems, Implements safety programs, Ensures job site materials and equipment are in good condition, May maintain time, production, and other records, May study schedules and estimate worker-hour requirements for completion of job, Perform additional assignments per supervisor's direction.

Compensation

Final agreed upon compensation is based upon individual qualifications and experience.

Benefits

Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program.

Physical Involvement:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

The Brock Group provides specialty craft and maintenance services to key industries across North America. We are dedicated to offering the safest and highest quality service and solutions. We view ourselves as partners with our customers, our employees and the communities in which we operate. Our performance-driven culture is led by having and developing the best people, the most efficient processes and the right tools for the job.

Qualifications and Detail about the Position

Summary:

A Craft Lead is the senior craft person responsible for performing work. This position is responsible for performing and directing the work of a single crew.

Responsibilities:

• Promote, demonstrate and instill Brock’s Brock’s Bsafe and Bbest culture in all aspects of the business
  
• Perform pre-job safety planning (Job Hazard Analysis) for each work task and ensure that employees adhere to all safety rules
  
• Conduct crew meetings and assist in conducting toolbox meetings
  
• Ensure employees are following all Brock, Contractor’s, and governmental safety requirements
  
• Understand scope of contract and change order process
  
• Ensure no out of scope work is performed without approved change order
  
• Ensure that work is performed in accordance with Contractor Specifications
  
• Ensure accurate loading, unloading and storage of assigned materials and equipment
  
• Assure that all equipment on the job site is in safe and efficient working condition
  
• Responible for proper use and care for all Brock and Client facilities and equipment
  
• Ensure compliance with Quality Assurance (QA) and Quality Control (QC) (including inspection and documentation) of the work
  
• Request equipment and supplies as needed and ensure that the proper equipment is being used for the specified tasks
  
• Estimate material and worker requirements to complete job
  
• Assign work to employees
  
• Ensure up-to-date, accurate time records, and ensures that man-hours, materials and quantities are properly reported
  
• Analyze and plan installation and construction of equipment and structures.
  
• Ensure workers are proficient in understanding Brock best practices
  
• Recommend measures to improve production methods and equipment performance to increase efficiency and safety

Other information:

Working Conditions / Physical Requirements:

• Meet Brock’s Fit For Duty Program
  
• Ability to meet and maintain customer requirements for site access
  
• Work in an indoor and outdoor environment including field, yard, shop locations, and office.
  
• Necessary Personal Protective Equipment is required.
  
• Travel as required
  
• Working at heights
  
• Must be able to work in all types of environments, extreme heat or cold
  
• Able to work in confined spaces
  
• Must have required tools
  
• Must have transportation to and from the work location

Skills & Abilities:

• Able to effectively communicate with other employees and supervision
  
• Ability to work independently or as part of a team
  
• Ability to read and understand specifications, such as blueprints, to determine requirements

Education & Experience:

• 3+ years’ experience in craft; or
  
• 2 years’ craft experience and 1 year supervisory experience

Location Information:

The Dow Chemical Company - Plaquemine Site

Location of Job:US:LA:Plaquemine

Shift:

Exempt: No

Work Type:Full Time

Working Conditions:

ORIENTATION - Must be able to successfully pass Brock and/or Safety Council Site Specific Orientation requirements.

HEAVY WORK - Lifting up to 50 pounds of force from the floor to the waist and 35 pounds of force from the waist to above shoulder.

CLIMBING - Ascending or descending ladders, stairs, scaffolding, ramps, and the like, to elevations in excess of 100 feet, to maintain three-point contact at all times.

LADDERS - Using vertical ladders Frequently up to 100 feet - Activity exists up to 60% of the work shift.

STAIRS & RAMPS - Using stairs or ramps: Occasionally up to 100 feet - Activity exists up to 40% of the work shift.

BALANCING - Maintaining body equilibrium to prevent falling when walking, standing, crouching, on unprotected elevated surfaces using fall protection equipment; or maintaining body equilibrium when performing scaffold construction at elevations using fall protection equipment. Frequently - Activity exists up to 60% of the work shift.

STOOPING - Bending body downward and forward by bending at the waist, requiring full use of the leg and back muscles on a repetitive basis. Frequently - Activity exists up to 60% of the work shift.

KNEELING - Bending legs at knee to come to a rest on knee or knees. Occasionally - Activity exists up to 40% of the work shift.

CROUCHING - Bending the body downward and forward by bending legs and waist. Frequently - Activity exists up to 60% of the work shift.

REACHING - Extending hand(s) and arm(s) in order to receive materials from ground level weighing up to 50 pounds as it is being passed and 35 pounds from overhead. Frequently - Activity exists up to 60% of the work shift.

GRIPPING - Seizing, holding, grasping, turning, or otherwise working with hand or hands to receive materials weighing up to 50 pounds. Picking, pinching, or otherwise working with fingers rather than with the whole hand or arm as in handling. Frequently - Activity exists up to 60% of the work shift.

VISION - Have 20/40 vision with or without correction in at least one eye.

HEARING - Must be able to hear a forced whispered voice in one ear, the better ear, at not less than five feet with or without the use of a hearing aid.

WEATHER EXPOSURE - Exposure to outside atmospheric conditions. Conditions can range from -10 to 110 degrees Fahrenheit. Constantly - Condition exists in excess of 60% of the work shift.

PROTECTIVE EQUIPMENT - Must be able to properly do all required personal protective equipment for the requirements of the job for up to the entire work shift.

INSULATION TOOLS - Use Insulation tools commonly associated with type or work.

We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

PC is seeking a Mechanical Foreman to manage and work with multiple crew members on self-perform projects, and with a range of trade disciplines. It is preferred that candidates have three years experience as a mechanical foreman, six years of overall experience with installation of flanged piping systems, working with large diameter aboveground flanged ductile iron piping systems, installation of process equipment for wastewater treatment plants, and expertise with rigging of piping and equipment. Also a willingness to assist will ancillary work such as miscellaneous metals is required.

Key Responsibilities:

• Lead, motivate, and manage the crew
• Read and interpret drawings, perform material take-off, and order materials
• Plan and schedule the work for the crew, daily, weekly, and monthly basis to include integrating subcontractor work as needed
• Work with tools when needed, and train/mentor
• Travel to jobsites as required

Benefits:

• Profit sharing bonus
• 401(k) with a generous company match
• Employee stock ownership plan (ESOP)
• Health, dental, vision, company paid disability, life insurance and leaves
• Paid time off and holidays upon hire
• Annual reviews and training and development opportunities with career growth

100% EMPLOYEE OWNED

PC Construction is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. We recognize that diversity and inclusion are a driving force in the success of our company.

About PC Construction:PC offers general contracting, construction management and design-build services to private and public clients across the country. The company manages projects along the east coast from its headquarters in Vermont and a network of locations in Florida, Georgia, Maine, New Hampshire, New York, North Carolina and the Mid-Atlantic. From specialized buildings to complex water and wastewater treatment plants, PC is ranked annually as one of the top contractors in the country. A construction industry leader for over 65 years, PC Construction is guided to success by its team of dedicated employee-owners.

Supervise the work as arranged through the Maintenance Planner to maintain equipment to meet production requirements and minimize downtime.

• Significant mechanical repair and maintenance experience including supervisory responsibilities
• Completion of a four year federally approved technical training program in mechanical repair and maintenance preferred equivalent combination of relevant experience, training and/or education
• Knowledge of the tools, equipment and materials common to the mechanical trade
• Strong understanding of applicable mechanical codes, standards and regulations
• Demonstrated skill in the installation, repair and maintenance of all types of mechanical equipment and components
• Prior experience estimating time and material requirements of assigned work projects
• Familiarity with Microsoft Office products including MS Excel, Word
• Good working knowledge of SAP.
• Demonstrated experience in leadership, problem solving, and decision making

ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

#LI-AT1

• Oversee the work performed by the mechanical maintenance crews and outside contractors to ensure completion in a timely and quality manner.
• Ensure the proper functioning of all mechanical control systems daily
• Participate in the implementation of investment projects. Provides input into the design and implementation of automation engineering projects to ensure the tasks can be accomplished in a quality, cost-effective, and timely manner to meet specific plant needs
• Direct mechanics in the installation of mechanical and control equipment and troubleshooting of mechanical and control problems to enable continuous plant operability
• Schedule, assign, plan and monitor the work of mechanical shop personnel to ensure completion of the tasks in a timely and quality manner
• Prepare material and labor estimates to develop project cost estimates and budgets
• Maintain time, work order, material, equipment and other mechanical shop records and submit reports to management to contribute to the continual evaluation of operational efficiency and costs
• Ensure budgeting guidelines are met
• Troubleshoot and diagnose system problems to provide resolutions and minimize downtime
• Utilize motivational and performance management skills to maintain optimal working relationships to achieve productivity and efficiency goals.
• Ensure the application of the rules of conduct and health & safety protocols during maintenance procedures to minimize injuries and lost time incidents. Lead effective safety meetings
• Provide ongoing mechanical support for all shifts
• Responsible for maintaining the Mechanical department’s tools and equipment
  

Position Summary:The Payroll Specialist will work directly with the Payroll Manager to process high volume bi-weekly payroll for both domestic employees using JD Edwards software. This is a full-cycle, multi-state and international payroll position for confidential payroll.

Salary Range: $70,000 – $90,000

Principle Responsibilities:

• Assist with the processing of biweekly multistate confidential payroll for both our domestic payrolls.
• Coordinate with our third-party tax source to ensure compliance with US regulations.
• Maintains employee confidence and protects payroll operations by keeping information confidential.
• Ensures compliance with applicable federal, state, and local payroll, wage, and hour laws and best practices.
• Support the month-end closing for all payroll-related accounts to ensure quarterly and annual payroll tax returns and other statutory reporting requirements for domestic payroll can be processed to meet statutory deadlines.
• Ensure accuracy of employee benefit contributions, fringe benefits, garnishments and other employee deductions.
• Research payroll issues/discrepancies and process necessary corrections.
• Prepares and maintains accurate records and reports of payroll transactions.
• Receives and responds to payroll and payroll related inquiries from current and former employees.
• Facilitates audits by providing records and documentation to auditors.
• Performs additional duties as assigned.

Essential Functions:

• Standing/Walking/Sitting: workday is combination of standing, walking and sitting.
• Must be able to climb stairs: 5% of day.
• Hands/Arms: constant use of hands/fingers for mouse/keyboard/computer use.
• Sight: visual acuity in near, mid and far range vision. Color vision, peripheral vision, depth perception, hand/eye coordination.
• Hearing:sufficientto hear conversational levels in person and over the telephone.
• Speech:sufficientto make oneself heard in person, speak in front of groups, and be understood over the telephone.
• Bending/Twisting: minimal.
• Kneeling/Crouching/Crawling: minimal.
• Constant mental alertness, accuracy, and attention to detail required.
• Must be able to work independently, make decisions, and follow through on all assignments.
• Must use creativity, independent judgment, and organizational and problem-solving skills to determine the best method to accomplish desired results.
• Must be able to plan and organize work.
• Must possess strong organizational and computer use skills and have a high level of competency to read/write/speak English, interpret construction related documentation and communicate with coworkers.

QUALIFICATIONS

Required Skills:

• 3 years working experience with union and non-union full cycle payroll.
• Two-year associate degree or direct experience equivalent.
• Understand proper taxation and deduction for compliance with the Fed, State, local jurisdictions and payroll regulations.
• Excellent organizational skill, attention to detail. Must be able to prioritize tasks to meet deadlines and demands.
• Strong mathematical, analytical and problem-solving skills.
• Proficient with Microsoft Office Suite and payroll software.
• Strong leadership skills and sense of ownership.
• Ability to establish and maintain strong and meaningful relationships with others.
• Ability to communicate effectively with teammates and various levels of management as well as external contacts.
• Self-motivated working under minimal supervision.

Preferred Skills:

• Experience working in JD Edwards.
• Certified Payroll Professional (CPP) certification.
• Prior experience processing multi-state and international payroll.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce.

We are seeking an Ironworker Foreman for a turnaround position in Kingsport, TN. The Foreman position exercises independent judgment and supervises and directs a group of workers engaged chiefly in one occupation. Non-exempt role; Reports to the General Foreman or Supervisor; Performs a variety of routine duties within established policies.

• Turnaround work
• Per diem available for those who qualify

Essential Qualifications:

• High school or equivalent
• Minimum two (2) years of experience as a Mechanic A/Journeyman
• Knowledgeable in his/her craft, in order to lead others in the same craft
• Possesses basic leadership/mentor skills
• Able to plan/coordinate multiple job tasks at the same time
• NCCER Crew Leader Certification preferred
• Written pre-employment qualification test
• Post-offer drug/alcohol screen and physical evaluation
• Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)
• Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.)
• Applicant/employee must not pose a direct threat to the health or safety of others in the workplace

Functional Requirements:

Upholds company safety guidelines to all employees under his/her direction, Interprets blueprints, sketches, written and/or verbal orders, Assigns duties, lines up and follows up all work and is responsible for production of the unit, Inspects work to ensure adherence to company standards, Trains and assists workers in the performance of their duties, Supervises and coordinates activities of assigned construction workers, Interprets company policies to workers and enforces safety, Regulations, analyzes and resolves work related problems, Implements safety programs, Ensures job site materials and equipment are in good condition, May maintain time, production, and other records, May study schedules and estimate worker-hour requirements for completion of job, Perform additional assignments per supervisor's direction.

Compensation

Final agreed upon compensation is based upon individual qualifications and experience.

Benefits

Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program.

Physical Involvement:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.